Enders 6 MGN9H型350毫米Y轴线性支架，无金属板（可能适用于工厂原装机箱）
Ender 6 MGN9H 350mm Y Linear Rail Mount Without Metal Plate (probably works with factory enclosure)
2023-09-09 00:06:59
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I've had MGN9H linear rails but i wanted to remove metal plates from v slot whells for weight reduction. Original mount was for MGN12H so i had to redesign it for 9H ones. I believe this kit should work with factory enclosure but im unsure about it.
Parts which i used:
2x MGN9H linear rails 350mm
8x M3x10 screws with washers
4x M4x30 screws
After this u have to check belt tensions. Mine were a bit off.
Print Settings
- Rafts:Doesn't Matter
- Supports:Yes
- Infill:50%
- Filament brand:
3DActive
- Filament color:
light blue
- Filament material:
PLA
License
CC BY
Ender 6 MGN9H 350mm Y Linear Rail Mount Without Metal Plate (probably works with factory enclosure)
by marcindgr is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
MBX5 电池与 ESC 组合托盘2024-05-08 -
自行车电池计量架2024-05-08 -
圣诞主题旋转木马2024-05-08 -
工匠系列V20 18Ga 无绳式钻枪夹持架挂件2024-05-08 -
144001 后部扰流板2024-05-06
最热下载
-
钥匙扣2023-03-26 -
Queen Anne Revenge 船2023-03-26 -
模块化抽屉 2.02023-03-26 -
Woods Mower 30922 护盾保持者2024-04-24 -
泰坦电视核心升级2024-05-02