MTG 指挥官卡牌盒（100+张）

MTG Commander Deck Box (100+ Cards)

2023-09-09 03:56:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Deck box for 100+ sleeved cards with a window for your commander! (Not sponsored by GFuel lmfao)

Made a deck box a while back that let you showcase your commander at the front of the box. Design was a little tall, kinda bulky, and generally not a neat as I wanted.
Decided to update to a rounder, more compact form.

The "Deck Slot" of the box will hold 109 single-sleeved cards.
The "Commander Slot" will hold 2 single-sleeved cards.

This box will NOT fit 100+ double-sleeved cards.
The slot in the front is also NOT large enough to put a toploader/hard sleeve into, though it can fit partner commanders and ones with backgrounds nicely.

I'm considering a 60+ card variant, a design for top-loaders, as well as one for double-sleeved decks. Comment or reach out if that's something you're interested in.

Two part print: Body & Lid. No supports necessary.
May need to sand down/work the lid into place.
My prints were made on an Ender 5 Pro with Hatchbox brand PLA filament, printed on a heated, glass bed.

Print Settings

Printer brand:
Creality
Printer:
Ender-5 Plus
Rafts:
Yes
Supports:
No
Resolution:
0.2mm Layer Height
Infill:
33%-50%
Filament brand:
Hatchbox
Filament color:
Blue
Filament material:
PLA
Notes:
Recommend printing the lid with a raft. I know that seems like a waste, probably using just as much filament on the lid's raft as the part itself, but I had some issues with bed adhesion on two lid prints which made them unusable.

Infill percentage should be based on how heavy you want the box to be. I find anywhere from 33% to 50% matches other brands like Ultimate Guard.