Scythe传奇盒子全能插入/组织器

Summary

If you want, you can help me with designing inserts by donating here:
https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8

Hello,

for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused on reducing setup and space on table, filament consumption is not my highest priority, but of course I'm trying to save some material where I can.

Important Notes:

• faction holders were inspired by ThePolymath amazing work, I made them from scratch but it looks similar, because I very like his design. Nevertheless I wanted to shrink it a little and add covers,
• I also wanted to design my own insert because of two things - I wanted to use less filament (that didn't turn out well :P) and I wanted to make space for modular board,
• because of modular board support - there is no space for basic resources and cardboard coins if you have deluxe resources and metal coins (also I don't know if ‘50’ cardboard coin will fit, metal ‘50’ coin will probably not fit) (well, there is a little space left so maybe you could somehow fit that, but I didn't design any holder for them),
• in the last few pictures there are spoilers from Rise of Fenris, I added special picture before them informing about them.

Supports:

• sleeved card, tested with Sloyca 70 microns thick (probably 90 microns will also fit),
  all expansions except Metal Mechs - including Modular Board!, I don't know if Metal Mechs will fit, I don't have them so I couldn't make sure that they will fit,
• vertical storage.

This insert features:

• faction holders - each faction has separate holder for all tokens, minis etc. related to that faction,
• fenris tokens holder - every token from fenris is in 1 box, so it is easier to find everything and easier to leave it in a box when you're playing base game,
• battle card holder - holder for battle cards featuring also space for discarded cards,
• optimized game setup - I designed this insert in the way that components needed for every game are on top of the box, components not needed (like factions that you don't play very often or fenris expansion) can be stored at the bottom of the box (or top if you play mostly fenris).

Requirements:

• about 2350g of filament (depends on your settings)
• at least 188mm x 143mm print bed.

Instructions:

Supports - no supports required.

• Cards_Holder_Large_Divider - print 7 of these (or less / more, depending on how you want to divide cards, 7 will be sufficient for dividing based on card / tile type)
• Faction_Holder - print 7 of these,
• Faction_Holder_Cover - print 8 of these, 7 for Faction_Holder, 1 for Faction_Vesna_Holder,
• everything else print once.

Post processing:

• components with covers - open and close like 20-40 times, after that it should open and close without problems, in extreme cases you may need to sand cover a little.

What future holds:

• I don't like that some tokens in Fenris_Tokens_Holder are not easily accessible, so probably I will redesign it in the future (it will still fit, so no worries),
• I don't like exploration tokens holder and fenris mini holder, maybe I will redesign it also.

Enjoy!