Nikon AF Nikkor 14mm f/2.8D 镜头罩

Nikon AF Nikkor 14mm f/2.8D Lens Cap

2023-09-09 06:09:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

IMPORTANT: The cap only fits properly with a ring of ~2mm thick felt fabric applied to the interior wall. Without it the cap will be way too loose.

I originally found @Xtruder's Nikon 14mm lens cap, which was a great start. But then my friend and I took it and made some enhancements.

Changes:
• We rounded the top edge for looks.
• Added beveling so there's a nice place to grip the cap.
• We widened the diameter so that the interior measurement was 90.5mm so that I could epoxy in a ring of ~2mm thick black felt fabric around the inside. That way the printed PETG didn't scratch the len's paint finish over time as it slips on and off the built in lens hood fins of the 14mm. It took a couple times to get the sizing right.
• I used JB Weld Two Part Plastic Epoxy to attach the felt for very strong adhesion.

The fit is perfect with the felt I have. Enough retention that I can lift the lens by the cap and it stays on, but comes right off when you want it to.

The matte vinyl label I designed in Affinity Designer and had printed by Sticker You.

Print Settings

Printer brand:
Rigid3D
Printer:
RigidBot
Rafts:
Doesn't Matter
Infill:
100
Notes:
Rigidbot-2 3D Printer

PETG

The G code files with all the machine settings is available for download as well.