检查阀
Check Valve
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is meant to be a one-way check valve between two parts of a water tube.
Feel free to copy and customize your own diameters.
After trying several thingiverse check valves, I wasn't satisfied. So I tried to come up with one of my own :)
Main part:
- 18mm inner diameter
- contains 16mm standard marble (you can buy it in toy stores)
- bottom part is 'curved' to allow marble to 'sit' on the bottom when blocking
- holes on sides for a 'pin' blocker
Pin blocker:
- simple stick to go through the main part and block the marble from coming out
Connector:
- 16mm outside diameter in order to fit tightly inside the main part's larger end
Note on tolerance:
My Ender machine is quite old so the tolerances and quality for me came out "ok", but water was still seeping out about 1 drop every 2 seconds when I tried it. Still, quite good as far as I can print it at 0.12mm.
Probably better machines will achieve a tighter result and either completely block water or very slow drip. Good for most purposes imho.
Can even server as a 'constant drip' valve for plants, now that I think of it :P
Let me know in comments or messages what you think!
Thanks!
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Resolution:0.12
- Infill:100
- Filament brand:
Unknown
- Filament color:
White
- Filament material:
PLA
Tags
License
Check Valve
by Yafimski is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Folding Fan with Dragon year design2024-01-05 -
乌克里乐五声音阶结构模型2024-03-19 -
阿尔托德斯潜伏追踪者（箭矢+槽位+抛掷刀）2024-03-29 -
捉鬼敢死队之普基2024-04-18 -
CS2/CS:GO Awp 模型2024-05-04
最热下载
-
车身RC 1/102023-03-26 -
Toyota 22RE发动机扩展套件2023-03-26 -
凯弗·鬼魂追踪者2024-01-18 -
原始控制舱2024-03-25 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
最新模型
-
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08 -
砂布圆盘转孔2转换器2024-05-08 -
阿普丽亚油回收器3D模型2024-05-06 -
sourceone v5 HGLRC M100 5883 支架2024-05-06 -
线轴固定器902024-05-06