Hanging Nerf Target Print in Place

2023-09-10 00:48:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A print in place hanging target arrangement for Nerf and Foam blaster target practice. Includes threaded 1/4-20 tripod mount and countersunk #8 wood screw holes for mounting options.

Changes from original:

Upscaled so sizing is more appropriate for foam darts opposed to airsoft.
Moved mounting holes to inside supports and removed outside base to allow for printing larger size.
Added cross supports and threaded tripod mount.

Suggest Strong Print settings. Target was able to stand up to Rival rounds from Pilot XII-100 (93fps) and half length rounds from modified Aeon Pro (150fps+) at 6ft with print settings listed bellow.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
50% Gyroid
Filament brand:
iBoss
Filament color:
White
Filament material:
PLA
Notes:
- 2.0mm wall thickness (0.4mm extrusion width * 5 perimeters)
- 2.4mm top and bottom thickness (0.4mm extrusion width * 6 layers). (Increased thickness to toughen against dart strikes)