TPU车门保护板

TPU Door Bumper

2023-09-10 01:28:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made this to allow my spring-hinged door to remain slightly cracked so my pets could get in or out of the room without leaving the door wide open all the time. It prevents the door from closing and latching when the door recoils from entering or exiting.

This is a simple bumper that can hang over the top of a door or on the side to prevent a door from slamming or shutting itself if it naturally swings toward the frame.

As designed it fits a standard 1 3/8" interior door so rescale if you have a thicker or thinner door.

VERY IMPORTANT:
Set horizontal walls for top and bottom layers to ZERO. This prevents a top/bottom from interfering with the grid infill which will act as a spring when the door hits the frame.

Print Settings

Printer brand:
Sovol 3D
Printer:
Sovol SV06
Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
15% Grid
Filament brand:
Overture
Filament color:
Blue
Filament material:
PLA
Notes:
VERY IMPORTANT:
Set horizontal walls for top and bottom layers to ZERO. This prevents a top/bottom from interfering with the grid infill which will act as a spring when the door hits the frame.

Vertical walls 2

I uploaded the Prusa .3mf file I used to print this so you can see the settings I used for printing TPU with a Sovol SV06 Plus. YMMV with different printer and filament types.