半遮挡屏，用于La Crosse TX29U户外温度计

Half Stevenson Screen for La Crosse TX29U Outdoor Thermometer

2023-09-10 03:55:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix specifically for La Crosse TX29U outdoor temperature sensor, designed specifically for standing or mounted flush to a wall.

This is a non-parameterized model that creates middle sections which stack, a top section with a lid, and clip onto a TX29U to protect it from wind, rain, and snow.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
50%
Filament brand:
Generic
Filament color:
White
Filament material:
PLA
Notes:
One section will need the clips trimmed off in order to use the TX29U's exterior wall mount clips. See images for how this looks.

There is enough clearance to use the exterior clip mount with the flat side of the shield roughly flush to the wall.

I attached the sections with a standard hardware-store 2-part epoxy, but you could probably also use hot glue, PLA goo, or hot extruded PLA if you are good with a 3D pen.