Layla - 夜之绽放

Layla

2023-09-10 09:42:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

PROPERTY OF MIHOYO. USED WITHOUT PERMISSION.

i posted this on deviantart back in 2022, but no one seemed to care... so here it is.

i'll be switching to white resin since my 4L of gray is almost spent. my FEP is also spent, so i'll swap that out after my next print.

i have nilou printed as well. i'll try taking some pictures of her tomorrow... actually i have a whole bunch of models printed so i'll try to get those posted soon.

don't attempt this with FDM unless you know what you're doing. my releases are all designed for tolerances at 1:4 scale, so if you don't have 20 cm of height, don't be overly ambitious... at 10 cm i'd only print 1:4 scale (top quarter).

let's see some prints. i'm prototyping on a $230 CAD printer with the cheapest resin possible and my cleanup is still pretty horrible. in capable hands, the sky's limit, i'll push the Q45 infinit.

included STL is 3xSS FULL (simplified), but as always, you can customize the included BLEND as you see fit.

Print Settings

Printer brand:
FlashForge
Printer:
Foto 8.9
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
4K Mono
Infill:
Internal Supports
Filament brand:
Anycubic
Filament color:
Gray
Filament material:
Standard Resin
Notes:
2.0 seconds Exposure Time. Printed upside down. Hollowed in PrusaSlicer. Supported in Chitubox using Sphere connectors (these models are heavy... do not use Conical connectors or your model will detach and fall into the resin vat)

Printed as 1:4 scale (upper half)