Ginzzu V300、V350、V400的大腿模型

Big legs for Ginzzu V300, V350, V400

2024-01-02 22:29:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

You want to improve airflow?
Do you want to install a fan at the bottom?
Do you want to easily wipe away dust from your computer's underside?
Don't you hate it when things on your desk disappear and then turn up under your computer?
Are you looking for a way to place something on your desk, but there isn't enough space?
Do you like the design of old Soviet-style stools?

Then you're in the right place!

I made extended legs for the case. I tried to avoid losing rigidity, so I had to reinforce it with aluminum tubing. I sanded and painted it myself. The aluminum tube is sealed with black electrical tape. Everything is assembled tightly without using glue.

-.-.-.-.--Requirements-.-.-.-.--
Standard screws from old leg - 4 pieces.
Self-tapping screws with gaskets, 4.2x13 mm - 4 pieces (or 4 M3 copper-plated and screwed).
Square-section aluminum tubing (pipe) 14x14x1 mm
24.75 mm - 2 pieces
17.85 mm - 2 pieces

There is also a rubber model in the design. This can be printed directly with TPU plastic. In my case, I used it as a template and cut it out from an old mousepad.

The third model is me carefully marking a cutting line at a 90-degree angle on the tubing. This isn't necessary.

The basic model has walls and lids of 1.6-2 mm width, which can be filled arbitrarily.

To get all 4 legs, you need to use the mirroring function in your slicer.
1 leg - no mirror
2 legs - mirrored on X-axis
3 legs - mirrored on Y-axis
4 legs - mirrored on both X and Y axes

Then you're in the right place!

Needed

Standard screws from old leg - 4 pieces.
Self-tapping screws with gaskets, 4.2x13 mm - 4 pieces (or 4 M3 copper-plated and screwed).
Square-section aluminum tubing (pipe) 14x14x1 mm
24.75 mm - 2 pieces
17.85 mm - 2 pieces

There is also a rubber model in the design. This can be printed directly with TPU plastic. In my case, I used it as a template and cut it out from an old mousepad.

The third model is me carefully marking a cutting line at a 90-degree angle on the tubing. This isn't necessary.

The basic model has walls and lids of 1.6-2 mm width, which can be filled arbitrarily.

To get all 4 legs, you need to use the mirroring function in your slicer.

1 leg - no mirror
2 legs - mirrored on X-axis
3 legs - mirrored on Y-axis
4 legs - mirrored on both X and Y axes

Ginzzu V300、V350、V400的大腿模型

朋友，你觉得上面这个模型，属于下面的哪个分类？