骑士笔守护者
Knight Pen Holder
2023-03-26 17:11:17
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
I really like this model but the left wrist had a slit in it from the hand replacement on the original . I did my best in Meshlab to fix it, not perfect but better I think. I also scaled the model down to 95% of the original size.
Printing on an Ender 3 Pro, this model took some work to get it to print right. I was able to get the support on the build plate only using Cura as the slicer, tree supports with Tree Support Branch Angle at 63 degrees and a layer height of .12mm. The support isn't very strong, but it was sufficient to get a good print
骑士笔守护者朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
星球大战3D棋盘模型：MrBaddeleys国际象棋棋子50%比例展示2023-08-24 -
3D无手模型2024-04-19 -
丰田RAV4车门座椅夹板螺栓更换2024-04-20 -
女式凉鞋2025-07-16
最热下载
-
吸血鬼之夜2024-01-15 -
免费蜘蛛侠头像STL模型，适合3D打印2024-03-24 -
Woods Mower 30922 护盾保持者2024-04-24 -
花环戒指2024-05-08 -
沙箱建筑模型2024-05-08
最新模型
-
原神优菈2025-06-27 -
P-Touch胶带架2024-05-08 -
Sunlu FilaDryer S1 Plus气压计安装支架2024-05-08 -
BabyBuddha哺乳器支撑架2024-05-06 -
狐狸粉尘密封压机，直径36毫米2024-05-06