Endecker 3 x轴保护罩配浮动小滚筒（适用于自动水平仪）

Ender 3 x-axis cover with floating mini spool (auto leveler friendly)

2023-03-26 17:15:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

I was exploring ways to conceal the QR code on my Ender 3 v2 X-axis cover. I have a CR touch (bed leveling sensor) connected to the left of my extruder hence the cover needs to be slightly narrow with a larger opening on the right so that the CR touch sensor does not collide (during auto home or before prints). I searched several sites and could not find a perfect one so I designed this. I liked the mini filament spool design here: https://www.thingiverse.com/thing:2300389; so I decided to attach it to the center of the cover with a slight gap between the cover and the mini spool. The filament seems to float in the air. It took several iterations and prints to get it right finally. Check it out!!

This x-axis cover is designed to let the CR touch work without issues while the front covers the QR code area completely. Use 2-3 drops of super glue to attach the mini spool to the cover. I hope you like this design. Cheers

Endecker 3 x轴保护罩配浮动小滚筒（适用于自动水平仪）

朋友，你觉得上面这个模型，属于下面的哪个分类？