MTG 命令者牌组箱第三版

MTG Commander Deck Box v3

2024-01-04 22:50:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Besides the eye-catching locking mechanism, there are also further features, wich make this deck box unique. There are two storage compartments for small dice or tokens. And the door also acts as command zone. Just slide your commander in from the bottom and you're good to go. This updated version of the box can now hold up to 100 sleeved Magic The Gathering, Pokemon or other trading cards comfortably.

Print Settings

Rafts:
No
Supports:
Yes
Resolution:
0,2mm
Infill:
10%
Notes:
Material:
I used 3DJakes magicPLA and ecoPLA Refill.

Supports:
Only the Bolts need some supports. Although printing the files Door and Body presupposes some bridging. If you are printing very hot or some less suitable material for bridging like PETG, you might want to support these parts as well.

Post-Printing

Assembly

Take the Center Part 1 and insert the 10 Bolts.
Put the Center Part 2 onto the first part and press them together pretty hard.
Now, stack all of this onto the Top 2 part. Make sure that the side with the depressions in the corners is facing downwards. Then put the Top 1 onto it.
Try to rotate the Center Part while holding the top in place.
If the Bolts go in and out well, take off the Top 2 and pour some glue into the pentagonal hole in the middle.
Put the removed part back on again and make sure that the Center Part is still able to rotate!
Now, take the Body part and slide the door into it.
Finally, insert the Top with all the bolts retracted. Rotate the upper part of the box counter clockwise until it is locked.