Sharp VZ-2000 电源开关和支架

Sharp VZ-2000 Power Button and Bracket

2024-01-05 04:45:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement power button and supporting bracket for the Sharp VZ-2000 ghettoblaster.

Mine had the original power switch inside, but the fancy chrome cantilevered external switch and its lever arm were broken off, missing.

This is a simple supporting bracket and button.

Both can easily be scaled X Y to fit the hole as loosely or tightly as you desire. .25mm is about all it needs. If I was bothered I might have supported the button a little more on the Left and Right.

Mr Color silver acrylic paint is a fairly close match. I dont mind the 3d printed texture so left it. Clear acrylic top coat has protected the paint fairly well.

Theres a recess for a cheap little 240v-capable push button switch. Superglued in, and wired in parallel to the interior switch. YMMV, be sure you use yours safely, thats your responsibility.

This isn't particularly good work but if it helps keeps even one these lovely Sharp's working, all the better!