禅意高端球体

Zen Balls

2024-01-05 10:26:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Each ball will require printing the male and female halves which then screw tightly together.

The adaptors screw into their respective hemisphere to attach it to a drill for easy sanding. I suggest wet sanding for sure, but it's pretty quick and easy to eliminate layer lines and give even PLA a nice sheen, which can be further accentuated by paint or clearcoat. Fill them with stones or BBs or anything you want to give them a more beefy feel.

Included is a convenient cradle for storage.

Everything here is suitable for both fdm or resin printing but it's worth noting that the resin printed pieces don't need to be sanded.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
Yes
Resolution:
0.10 - 0.2
Infill:
50-100
Notes:
Print with walls/top/bottom at least at 1.2 mm to allow for what will be removed during post-process sanding.

Post-Printing

One at a time screw one hemisphere onto the drill adapter and use it (on forward) to smooth the finish of FDM prints with increasing grit sandpaper. If you start around 60 grit and work up to 320 you will get a nice smooth finish. Enhance this with paint or clearcoat.

If resin printing none of the post processing is necessary