孤立水瓶手柄

insolated water bottle handle

2024-01-05 11:23:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This water bottle handle is designed for an insolated water bottle that are 108 mm in diameter. it features a small indexing bezel on the bottom to keep the bottom ring right at the bottom of your jug. You can use your slicer to scale it down using math. Now, I don't know math but here's a link that I think might help you calculate the percentage but no promises lol

https://www.calculatorsoup.com/calculators/algebra/percent-difference-calculator.php

I recommend you print at a higher infill level with pla + or similar material due to its tendency to flex rather than break and its strength. I used 999 walls on mine so its solid all the way through and its pretty tough. also I'm running out of filament and my boss wants me to starve to death so any donations are greatly appreciated! Enjoy!

Print Settings

Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
normal i guess
Infill:
50-100
Filament brand:
whatever you like
Filament material:
pla+
Notes:
I printed at 100% infill and its solid, but I bet a lower infill would work too, as long as the rings are solid, I think if they weren't you'd have internal breakage and a compromised print.