Cameo 3 发型护理神器

Cameo 3 Curl Guard

2024-01-05 11:51:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Chances are anyone that uses a cameo 3 to cut HTV knows the issue I'm resolving here... Normal rolled vinyl feeds great through the machine because it curls down away from the head coming off the roll, but HTV is rolled with the backing on the outside causing the end feeding into the machine to sometimes curl up into the print head. It jams up the feed or knocks the material out of alignment, causing ruined cuts and wasted material. My go to move to avoid this in the past was taping a piece of heavy printer paper to the guide under the cutting that stuck out the back of the machine. It didn't look very elegant and would periodically come loose and jam up the head, negating the whole purpose. These simple stick-on L-shaped guards keep that from happening.

There's 2 different versions. One, with no recess on the mounting side, for use with the carpet tape/double sided tape of your choice, and ones that have recesses sized for medium command strips or whatever dollar store knock offs you can find that are 0.73" (~19mm) wide.

You need to space them down a couple mm to line up with the long plastic guard under the head guide so they don't interfere with movement. I've installed them on 2 machines and both had slightly different spacing so I didn't modify the model to adjust for that in case there were further variations. 2 guards would probably be adequate, I used 3 for a little extra protection. You do you.