Milling bit fan remix 3D模型

Milling bit fan remix

2024-01-05 17:20:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the 1/8" milling bit fan, originally from hanndoddi (https://www.thingiverse.com/thing:2715023).

The following changes has been made:

Decreased 1/8" bit hole diameter from the original from 3.6mm to 3.2mm - still slightly oversized but my printer prints this smaller. I still use a 3mm drill bit to drill the hole out and then install onto the bit by screwing it on
Increased the fin thickness from 0.43mm to 1mm
Added a raised portion to the fins and a recess in the fin surround to attempt to draw in more air from the top
Added a draft to the fin surround and mounting interface
Probably got carried away at some point with the aesthetic (hopefully functional) modifications
Intended as a blower fan towards the bit for my Dremel that spins counter clockwise when viewed from the bit end. If you need to alter the direction of the air, simply mirror the part and then print.
Tested and works good. Air is blown onto the bit end and the working area is clear of dust with my MDF cutting test.

Prints longer than the original. I like to use a fine resolution and 100% infill (not that the infill should make a difference in print time considering the thin wall thicknesses everywhere). No supports needed.

Feel free to modify as you wish.