厨房架子灰尘吸收器盖板（Utdrag）
Kitchen shelf cover for dust extractor Utdrag
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Cover for shelf to wrap around tubing of dust extractor
This is a set of covers for the break through of the tubing of dust extractor in a kitchen cabinet shelf. (Extractor is Ikea Utdrag). The wall cabinet on the picture is an Ikea Metod 60x60 (x 38,6cm depth).
Main purpose is to block sutff from falling down through the hole behind the tubing.
Note: The longest side is around 23cm. I.e. 25cm printbed should work, but 20cm will not.
Hardware
To mount the bracket, 2,9mm x 10mm or 15mm metal / plastic screws with flat / panhead are needed. Do not use countersink screws.
Preperation of the Board
I cut the shelf board with circle cutter and circular saw, however just jigsaw is also possible, the cover has a "flap" on bot sides to cover typical tear out that will happen when a jigsaw is used.
Mounting of the cover / board
-
Start by mounting the front part, i.e. the smaller and bigger "U" by screwing them together. The parts are designed to slightly clamp to the particle board. Do not overtighten the screws.
-
Mount the shelf into to the cabinet / around the tubing.
- Fit the rear "platform" part behind the tubing and screw it down to the lower "big U". Again dont overtighten screws to avoid brekaing any plastic parts.
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
Delta设置校准为Klipper2023-04-23 -
Quad博士的机械蝉2023-05-19 -
乌克里乐五声音阶结构模型2024-03-19 -
末世未来人类防卫军：火炮部队（FDM友好版）2024-04-04 -
第四代Neptune Wyze摄像头支撑架2024-04-12
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Dado - 立方体模型2024-03-24 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
大码动漫女战士2025-07-15 -
坏龙家的大宝贝女生别下2025-06-26
