熔焊气体吸收器带光源

Solder Fume Extractor with Light

2024-03-30 12:13:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Solder fume extraction fan. Uses 120mm fan (25mm thick) and an activated charcoal filter. The extractor is designed to slip onto the top of an inexpensive light/magnifier (with magnifying lens removed).
Keeps you workbench a little less cluttered while providing additional light to your project.
Overall dimensions: 126 x 126 x 65 mm (including mounting ring)
Enclosure prints as two halves - the halves are held together by attaching the fan to the case.

Notes:

Magnifying Light: https://www.amazon.com/gp/product/B08V4SQ69F
5X LED Magnifying Lamp, 1,800 Lumens Stepless Dimmable, 3 Color Modes,
8-Diopter 4.2″ Real Glass Lens Magnifier Desk lamp, Magnifying Light and Stand
Remove the lens by unscrewing the trim ring under the lens.
Charcoal filters: https://www.amazon.com/gp/product/B07D5SBPN8
6 Pack Solder Extractor Filter Carbon Filter Replacement Activated,
Smoke Fume Absorber Filter for Smoke Absorber 5 1/8” x 5 1/8” x 3/8”
Fan is 120 x 120 x 25 mm, with holes at 105 mm OC.
Power supply for the fan
Optional, small toggle switch and barrel connector for power.
Note the photo of the fans with the two red rectangles,
you will need some space (divot) at the fan corners to slip in the
switch and barrel connector.
GCode is at 0.3mm layer height, 5% fill. Printed on a PRUSA i3 MK3