DJI O3空气单元案例带风扇

DJI O3 air unit case with cooling fan

2024-01-05 22:48:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I just upgraded to the Goggles 2 and the O3 air unit and looked around online for a mounting case with a cooling fan for the O3, but couldn't find one. This is similar to the fan mount that I made for the Caddx Vista and should be a big help to prevent overheating in installations with limited venting or when sitting still for awhile. I included two versions of the case, one for mounting everything together so that it can easily be moved from vehicle to vehicle and mounted externally with Velcro. The second is a mount for just the Air Unit, so that the Camera and antenna can be mount elsewhere on the plane/drone. The bottom air unit screws will need to be replaced with longer 2mm screws, preferably flush mount or button screws. The 3mm fan screws should self tap into the mount. I typically us a 12v fan and power it up with a JST plug from the ESC or battery balance plug.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
100%
Filament brand:
Bambu
Filament color:
Rust
Filament material:
PLA-CF
Notes:
I didn't need any supports on the X1C, but some machines may. The only real overhand areas are the cutouts for the USB port and to access the Bind button. The bottom air unit screws will need to be replaced with longer 2mm screws, preferably flush mount or button screws. The 3mm fan screws should self tap into the mount. I typically us a 12v fan and power it up with a JST plug from the ESC or battery balance plug.