3dsjs

海盗帧 - 打击DJI行动2加TBS ND

Pirat Frames - Punch DJI ACTION 2 + TBS ND

2024-01-06 00:43:27

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This is a remix from T4OBRIEN's DJI ACTION 2 mount.

I adjusted it to fit the Pirat Frame Punch because I find T4OBRIEN's mount is giving a better protection.

I merged the files with my limited 3D designing skills.

Print with TPU filament, slowly
Use tree support if your slicer supports it
Best printed on its side (as oriented in the STL).
Use 2 perimeter walls for most setups. 3 walls for bando bashing.
Infill: Use 20 - 30% infill.
20% gyroid infill for cinematic / long range setups.
25 - 30% cubic infill for bando bashing
Really don't go above 30% infill, it just adds extra weight but no strength benefit.
yes then PRINT THE BACK GLASS PROTECTOR.stl in PLA/PETG/etc for all setups.

You will find more about T4OBRIEN's work here from his original post :

https://www.printables.com/fr/model/217897-rip-worthy-dji-action-2-tpu-drone-mounts-max-fov

海盗帧 - 打击DJI行动2加TBS ND
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢