Dell TB16 K16A 站式配件 USB-C 插槽外壳
Dell TB16 K16A docking station USB-C plug enclosure
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A simple replacement for USB-C plug enclosure for Dell TB16 docking station. I've never seen the original one, when I bought my two stations they were already broken, but after spending few minutes with caliper and Blender, here it is!
It holds with friction, no glue needed.
I also attach an stl file of the plug itself so you can see if yours will fit.
If you find it useful post a comment or a make!
Print Settings
- Printer brand:
Kingroon
- Printer:
Kingroon KP3S
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:100%
- Filament brand:
Spectrum
- Filament color:
Black
- Filament material:
PETG
- Notes:
I printed it in PETG, but PLA or ABS should do as well.
It's almost all wall model with barely any infill, so I set it to 100%, doesn't really matter.
Post-Printing
Assembly is simple. Attach the smaller parts around the cable; they should hold in place through friction. Then, slide the main part onto the plug until it fits securely.
Tags
相关内容
联系我们
最新模型
-
小型注脂枪补充装置2024-05-08 -
3D模型 GTX 750 GIGABYTE2024-05-06 -
X轴清洁：Prussa/Mendel打印机维护技巧2024-05-06 -
科巴尔特 24V电池固定架2024-05-06 -
Cobra Viper RDT7角色扮演道具模型2024-05-06
最热下载
-
3D模型：Easier Print LTT螺丝刀拉拔器2024-01-14 -
原始控制舱2024-03-25 -
二十面体骰子模型2024-03-29 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
