Benq BL24 VESA 模块化安装监视器

Benq BL24 Monitor VESA Modular Mounting

2024-01-06 08:21:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I want to mount some things to the back of my Benq BL24 monitor while still using the monitor stand. To use this, remove the back plastic plate and screw this into the VESA holes.

Use the NUC insert to mount the NUC on one side. Use the Raspberry mount to mount the Raspberry Pi to the other side, or mount two RasPi for balancing.

Using an Ender 3 V3 SE to print these.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament brand:
RepRapper
Filament color:
Doesn't Matter
Filament material:
PLA
Notes:
Since the NUC isn't doesn't have that much weight and the weight is carried by the screws, you might want to make sure your monitor stand is braced properly so that it doesn't tip back.

I am using an Ender 3 SE but the drop down doesn't have that in the selections.