Picoboot Raspberry Pi Pico 持有器（适用于Gamecube）
Picoboot Raspberry Pi Pico Holder for Gamecube
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I remixed the model because the other one always broke on me when installing the Raspberry Pi.
Works with the same principle, just bend it a bit and put the raspberry in, or slide it in from the top.
Install the raspberry first, then screw in the holder below one of the groundings for the controller port. You should probably also solder the wires before installing the holder.
If your pico is to long that is because of the pcbs edges (probably the edge where every pcb is connected in the factory), that sticks out. Just file it down a bit.
If you want step files, feel free to ask.
I used ABS, I don't know if other materials might snap or not.
Print Settings
- Rafts:No
- Supports:No
- Resolution:0.2
- Notes:
print it flat without brim or supports
Tags
License
Picoboot Raspberry Pi Pico Holder for Gamecube
by Domi189 is licensed under the BSD License license.
猜你喜欢
联系我们
热门推荐
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
Mobula 6盒3D模型2024-01-17 -
橙色PI 3B 仪表盘安装架3D模型2024-03-21 -
巨魔头像 012024-04-21
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Delta设置校准为Klipper2023-04-23
-
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
拒绝的手势2024-04-19
最新模型
-
任意立方体活动关节的一体打印外星人2025-07-19 -
HGX lite v2支架2025-07-18 -
高跟鞋鞋架2025-07-17 -
鞋带锁2025-07-17 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15