游戏厅编码器基础和按钮支架

Arcade Encoder Base and Button Spacers

2024-01-16 02:34:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For my home built RetroPie arcade, I purchased an Arcade Controller Pack directly from Geek Pub. I designed a few parts to clean up (not my rats' nest of wires) my controller area.

1) Geek Pub USB Encoder Base: Small base to mount under their USB Encoder (https://www.thegeekpub.com/product/usb-encoders-for-arcades-1-pack/). Four #4 x 1/2" countersunk wood screws were used for mounting. This part might work for other encoders as well.

2) 30 mm Button Spacer: I drilled my through holes to Ø1 3/16" [30.2 mm] and the threaded section of the buttons were closer to 28 mm. These spacers tighten things up. They are 5/8" long.

3) 24 mm Button Spacer: I drilled my through holes to Ø1" [25.4 mm] and the threaded section of the buttons are close to 24 mm. These spacers tighten things up. They are 3/8" long.