Adafruit 四轴旋转编码器（型号 #5752）外壳
Adafruit quad rotary encoder (part #5752) enclosure
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a small and efficient case for the Adafruit quad rotary encoder circuit board:
https://www.adafruit.com/product/5752
I've provided the open-scad source-code, so it should be customizable with just a bit of editing..
You probably want to print it "upside-down"; i.e. with the face with the knob holes facing the build-plate. This will not only avoid needing supports but gives the best quality for the most visible part.
Note that there are small overhangs for the "feet" but it seems to work well with basically default print settings.
I left the bottom of the box uncovered.. This allows you to put the circuit board in easily. What I ended up doing with mine is using some adhesive non-slip rubber pads (something like this: https://a.co/d/cPNoUGd) to close the bottom and make it non-slippy.
Have fun!
Print Settings
- Printer brand:
Bambu Lab
- Printer:
A1
- Rafts:No
- Supports:Yes
- Infill:15
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
面部线条设计2023-03-26 -
Vivosun DWC桶式接口适用于LST型号产品2024-03-17 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04 -
gba 游戏 任天趣 红蓝机 插入卡带2024-04-22 -
沙丘巡游者2024-05-03
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Apple鼠标 - M0100 3D模型2024-03-25 -
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）2024-04-03 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
兔女郎半身像2025-07-15 -
坏龙家的大宝贝女生别下2025-06-26 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24