旋转编码器专用旋钮 - 6毫米厚 / 12.5毫米长轴
Knob for rotary encoder - 6mm thick / 12.5mm long shaft
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The original design fits a 7.5mm thick shaft.
This remix fits a standard KY-040 rotary encoder button - 6mm thick shaft, 12.5 long (round section of the shaft at the bottom is 2.5mm long, D-shaped section is 10mm long).
The press-fit tolerance is 0.2mm (shaft hole is 6.2mm in diameter).
Additionally, the knob has a 2.5mm tall, 12mm in diameter larger hole at the bottom, to accommodate the tightening nut (11.4mm in diameter) inside the knob, allowing the knob base to be as close as 1mm from the mounting surface (still allowing the button to be pressed). Consequently it needs supports while printing.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.2
- Infill:15%
- Notes:
Enable supports on the base plate, and enforce support blocker starting at height 2.8mm, to prevent supports going further in the narrow part of the shaft hole (which would be hard to remove while post-processing).
Tags
License
Knob for rotary encoder - 6mm thick / 12.5mm long shaft
by crio333 is licensed under the GNU - GPL license.
相关内容
联系我们
最新模型
-
速度力场发射器 - CW的闪电侠2024-05-08 -
适用于 1:10 模型的 DKS-Basic 轮毂2024-05-08 -
Tiger II (VK 45.02 / VK 45.03) 大包装备集2024-05-08 -
2015年F-150中控台组织架构，带折叠中间座椅2024-05-06 -
换挡杆靴套2024-05-06
最热下载
-
三维打印可全制作转盘2023-03-26 -
二十面体骰子模型2024-03-29 -
7英寸HDMI显示器-B外壳2024-04-01 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21
