芝加哥电气钻孔路由器支架

Chicago Electric cutout tool plunge router bracket

2024-01-06 12:10:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Converting a cheap Chinese router lift to accept the Chicago Electric cutout tool. Depending on the height screw placement, you can make it a regular router or a plunge router

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Supports:
No
Resolution:
.12mm
Infill:
50
Filament brand:
Generic
Filament color:
Black
Filament material:
PLA
Notes:
Rotate the model 45 degrees to fit the Ender 3. Using a cheap Chinese router lift base from Aliexpress.
Replacing the moving bracket with this bracket and flipping the dept screw.
Knobs are extra T-track accessories, but other knobs can be used. Knob mounting screws are 1/4" bolt.
A 1/4" bolt was used to fill the height screw hole on the stationary bracket.
Replaced the height adjust bearing set screw with a M4 cap screw as well as using a M4 cap screw for the height screw lock.
Recommend that you also use a clear router plate to give it a little more clearance for bigger bits.
You can place the height screw in the original configuration to make this a regular router.