Eero 6+ 路由器壁挂支架（非倒置安装）

Eero 6+ Router wall mount (not upside down mounted)

2024-04-20 06:56:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wall mount case for the Eero 6+ Router (ignore the filenames, it took 8 iterations to get a working design but it is for the Eero 6+). It includes a front cutout for the Eero brand logo and also another cutout for the front indicator LED. 4 M4 screw holes are on the back, though realistically only the top two will be needed (or some adhesive on the back/bottom will do the trick). I didn't include any cable management as this is something that will depend on your arrangement and there are plenty of cable clips available for download.

It's a bit of a janky design as my AutoCAD licence ran out so I had to make do with FreeCAD, which is slightly less intuitive and contains some questionable toolsets. It doesnt help that the router itself is made up from a bunch of off-angle sides.

I tried my best, as there didnt seem to be an available model online that I could find that didnt require it to hang upside down (having eero written upside down on the wall would be too annoying).

Recommend printing in PETG or something flexible as PLA can be brittle and you wouldnt want it to break if you bump into it and have the router hang from the cable. I printed it in 0.2 mm layers (took about 16 hours with supports on my old Ender 3) and sprayed it with a base matte white then a gloss white and it looks pretty good.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2 mm layers sufficient
Infill:
20% sufficient
Filament brand:
noideawhatbrandiused
Filament color:
White if you have it, recommend painting though for better finish
Filament material:
PETG
Notes:
Doesnt fit the Eero Pro 6 or any other Eero routers, just the Eero 6+

Post-Printing

Paint for better finish

I printed it in 0.2 mm layers and sprayed with a matte white undercoat (several layers), then finished with a white gloss spray.

This gave it a shiny finish and the print layers are essentially invisible.

Also required a bit of sanding on a few spots, but this is printer-dependent.

How I Designed This

FreeCAD

I basically spent a few days or so taking measurements with a protractor and a ruler, and making a few quick and easy PLA prototypes until I could slot the router into the case with a satisfying clunk. Then I reprinted in PETG, sanded the rough edges and sprayed it. There was probably a better way but it worked in the end.

Eero 6+ 路由器壁挂支架（非倒置安装）

朋友，你觉得上面这个模型，属于下面的哪个分类？