Eero 6+ (6 Plus) 天花板或墙壁安装

Eero 6+ (6 Plus) Ceiling or Wall Mount

2024-03-26 01:03:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Couldn't find a mount for the Eero 6+ (Eero 6 Plus) routers, and the ones available are for the 6e pro, and are not even close in size. Figured I could make one for my needs, and hopefully yours. There is a small amount of space under the router for cable management, but i didnt need it.

Print Settings

Printer brand:
FlashForge
Printer:
Adventurer 3
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
100%
Filament brand:
Overature
Filament color:
White
Filament material:
PLA
Notes:
If you want to take the time, and your slicer permits, you technically could make the base only 15-20% infill. I recommend not wasting your time though, as this will only save about 5-10 minutes. Because you need to deflect the arms a fair amount to get the router installed, it needs to be 100% infill. I guess you could alternatively try a "Tough" PLA, or ABS if your printer permits.