Eero 6 支架

Eero 6 mount

2023-08-07 01:37:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remixed lukeskymaker Erro mount. Took off the side plate, put a hole in the middle to try and dissipate some heat. If you have these you know they get hot. Also added spacers in the rear to bring it out from the wall a bit for heat distribution.

Erro-mount-2.0.stl - has a pattern in the rear and would need supports. * I have not tried to print this one.

Erro-mount-3.0.stl - is just an open hole supports are suggested on the large opening. I opted not to do supports and you can see some issues in the pics but it didn't fail and its an easy fix.

Print Settings

Printer brand:
Longer
Printer:
Longer LK5 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.28
Infill:
25%
Filament brand:
Esun
Filament color:
milk white
Filament material:
PLA
Notes:
I printed at .28 layer height (low quality) to save some time.
V3 print took little over 13hs at 50mm/s