Gellet倾倒分流器

Gellet Scoop Funnel

2024-01-06 13:21:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My son and I got gel blasters for Christmas, and I quickly found trying to hand-load the gel balls into little openings for the ammo clip was pretty difficult. So I adjusted erdna90's great coffee bean funnel scoop to facilitate loading the little bouncy beads into hoppers or clips.

Print Settings

Printer brand:
Creality
Printer:
Ender-5 Plus
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.4mm
Infill:
15%
Filament brand:
Overture
Filament color:
White
Filament material:
PLA
Notes:
erdna90's suggestions regarding the print nozzle and layer height should still apply. I just left my personal defaults without much thought on my part.

How I Designed This

I took the 1/2 lb scoop into Blender, reduced the size by 50%, added some water drainage holes, and adjusted the funnel spout for a taper and a bit smaller to fit the hoppers we have.

I found the reduced size to work well to fit it and my hand comfortably in my water container.