3dsjs

Ender 3 SE V3摄像架

Ender 3 SE V3 camera stand

2024-03-14 23:58:48

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This can be used as a place to put a Creality Nebula camera, or a Wyze camera, sitting at the front of your machine. It is long enough for full clearance of base. There is a screw underneath your Ender 3 V3 SE, front middle, which can be removed and replaced with a slighter longer screw to mount base2. The screw needed is an M3 by 12 -OR- an M3 by 14. The cylindrical peg is for the Nebula camera and the other peg is for a Wyze camera. You can leave base2 screwed to the machine and then use the other base to place camera around work area.

setup for a Ender 3 V3 SE

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender-3 V3 SE

Ender 3 SE V3摄像架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢