M84 模拟训练手榴弹（抗冲击设计）
M84 Training Grenade (Impact Resistant)
2023-03-26 17:22:53
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
M67 Fragmentation Grenade Trainer: https://www.thingiverse.com/thing:5665277
This is a M84 stun grenade made for my ROTC unit for tactical training. It's designed to accept a 4.25 inch section of 5/8 inch threaded rod through the center of it to keep it rigid and add a convincing amount of weight to it for throwing. Use it for your own tactical training, airsofting, and more!
Some assembly tips found via trial and error:
- Print the body of the grenade vertically
- Print the fuse of the grenade vertically but inverted (top flat face on print bed)
- Print both separately, TPU strings readily
- Cutting the threaded rod will result in burrs that complicate inserting it, bevel the edges for easier insertion
- Heating the rods in the oven to about 300F lets you temperature fit the rods for easier fitment and stronger adhesion
- Inserting the rod into the grenade body first lets you screw on the fuse very easily
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
东方风格机械关节龙3D模型2023-03-26 -
双动作OTF隐藏刀具（刺客风格）2023-03-26 -
法兰西人钥匙扣3D模型2024-01-07 -
索尼爱博 ERS-210/220机器人狗 18650替用电池盒2024-01-14 -
3D模型：Creality Ender 3 S1 Pro网络摄像头固定架2024-01-14
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Wolf系列手机支架2025-07-16 -
CZ455 452 512 弹匣底板2024-04-22 -
史诗级生存刀具2024-05-03 -
沙箱建筑模型2024-05-08
最新模型
-
3D Pokemon 卡牌盒2024-05-08 -
骰子镇的金矿石2024-05-08 -
Pokemon Go 社区日第86次 # Bounsweet 鸣泉2024-05-08 -
外部电机用鼓风机2024-05-06 -
Shift Collar Boot Support - 可调节领口靴子支撑2024-05-06