花冠王冠帽子持有者
Flover Crown cap holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
What do you do with the crown cap after opend a beer? Throw theybehind your back and forget it. A day later, when you clean your household there are everywhere bottle cap's.
With this print you have a solution for this problem. You print it put it together, glue tow magnets (Ø5mm x 8mm) at the top and show it your friends. They can throw there cap's into the pot or they build a beautiful flower on top of the stalk.
There is a number infront of every file. This is the scale in procentage you have to print it. This is that everything goes perfect together.
Print Settings
- Printer brand:
Snapmaker
- Printer:
J1
- Rafts:No
- Supports:Yes
- Infill:15
- Filament brand:
GratKit
- Filament color:
green, black, wooden PLA
- Filament material:
PLA
- Notes:
There is a number infront of every file. This is the scale in procentage you have to print it. This is that everything goes perfect together.
Tags
相关内容
联系我们
热门推荐
-
Arduino学习工作站2023-03-26 -
Makita 12V 工具架2023-04-26 -
Rlaarlo 917 GNSS 持有器2023-05-15 -
Opel Zafira B 后退档锁 3D模型2024-04-02 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
弓箭和投射器战车前轮2023-04-12 -
基础鸟饲料架2024-04-30 -
线框无心2024-05-08
最新模型
-
Para Clip 夹具 5502024-05-08 -
1/56 比例（约28毫米）戈瑞什小人2024-05-08 -
卡塔琳娜22型船模桅杆门2024-05-08 -
漫步者 R1000T4 3D模型2024-05-06 -
乐高风格圆润光剑模型2024-05-06