Turing 5英寸智能屏幕 Lian Li 011D evo 后置安装

Turing 5 inch smartscreen Lian Li 011D evo rear mount

2024-01-06 22:40:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted to mount my 5inch screen in the rear of my case and I noticed there was a bracket above the PCI slots that I dont know anything about, so I made it a mounting bracket for my screen.

I also made sure there is full access to the SD card slot.

It was a bit tricky to get in but heres how I did it.

Attach the printed bracket to the screen
Remove the screw from the metal bracket in the case
Insert the printed adapter into the metal bracket (watch the screen cable. Its a tight fit)
Make sure the screw holes match up on the printed bracket and case/metal bracket.
Re insert the screw.(You may want to tap the printed part hole first for easier insertion)

I do believe I got it in once but attaching the metal bracket first then inserting the whole assembly at once but it was not as easy I think.