改装后的Ender 3 Cr-10 Tevo Z型电机支架

Reworked Ender 3 Cr-10 Tevo Z motor brace

2024-01-07 01:47:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I like the design of the Z motor support that XIMES made, but after I printed out a pair for my CR-10 V2 I found that the lower brace is going in the wrong direction. The T nut for the lower bolt hits the frame bolts in the CR-10 (and Ender 3) and would interfere with the T-bracket on Tevo Tornados.

So I redesigned the bracket to have the lower leg in the other direction, to the rear of the printer. This clears all the interference for the various printers noted. It is also stronger in holding down the rearward part of the Z motor, which is away from the vertical Z frame of these style printers.

The .stl file is oriented for the right side (2nd) z motor, FYI. So if you need just one for the left side of your printer, just download into your slicer and MIRROR.
Print with the angled brace side down for minimal support used.
If you need a L&R, load one to your slicer, mirror it, then load a 2nd to the slicer.
I printed these in ASA.

You need:
3 M3x 8mm BJC or Philips head screws to attach to the Z motor,
2 M5x10mm Counter sunk allen screws
1 M5 x 10mm BHC or Phillips head screw
and 3 M5 T nuts
for each side.