24 Spool干燥盒改装套件用于金属壁架

24 Spool Dry Box Conversion Kit for Wire Wall Rack

2024-04-29 07:31:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This $67 wall mount electrical wire spool rack, will hold 24x 1kg spools of 3D printer filament, with easy Dremel mods. See my review on the product page for details on the modifications.

This thing will contain all the printable parts and pieces, to fully enclose the front of this wire rack, to use it as an oversized dry box. Currently only the corner pieces have been completed and uploaded. You'll need two printed as is in the STL, then two more printed, mirrored on the X or Y axis (so the flat part will face outwards on both sides).

The slot/groove on the corners, are to allow a ~0.8mm sheet of PET plastic to slide in from either side, to seal the face of the rack dry box. The top and sides (created by the corners) are expected to be sealed with thin PET sheets and gorilla crystal clear tape. The bottom pan will be filled with rechargeable desiccant beads.