佩顿康普 CVA-24 齿轮套件及工具

Pentair Compool CVA-24 Gear Set and Tools

2024-04-19 03:06:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This gear set fits the lower assembly of a Pentair Compool CVA-24 valve actuator. If the shaft seal fails or any of the upper seals fail, water will intrude the gear set and (being steel) they will corrode and fail. The replacement set is $70 (not sure what the tools cost to remove the shaft to fix the seal). I (reluctantly) ordered a replacement set to rebuild the actuator, but before reassembly, I blue printed the gear set and created tools to remove the shaft retainers.

If you have a similar failure, these 3D printed versions should last long enough to either order new steel gears or print new ones as required - I recommend Polycarbonate or Nylon (if you have a heated chamber) or plane old PLA or PLA+ if not subjected to higher temperatures.