3D模型：USB接口绑定器

USB adapter tethers

2024-01-07 05:37:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

On a recent family trip, there was a lot of "Does anybody have a usb cable? No, the one with the other end... No wait, the OTHER connector".

When I got back, I dug through my stuff, realized with a bit of thought, I could have one cable that does it all, so I designed and 3D printed some tethers for the adapters!

With a couple tethers printed with flexible filament, I now have a USB c-to-c cable with a c-to-a adapter tethered to one end, and a c-to-mini adapter tethered to the other.

The tethers use a tight friction fit to stay connected--the flexible filament I'm using has just enough stretch to it for a nice tight fit, though I wouldn't trust it in life or death situations.

Of course, I had to customize these to the adapters and cable I have in my house, so I'm including the .scad file and enable customization so you can tweak the sizes to fit your cables and adapters. It's worth noting that the width you use should be smaller than you expect--it should be the straight part of the adapter without any rounded shoulders.