趣味QOOCAM架构模型

QOOCAM-FUN rig

2024-01-07 08:00:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This rig adds various mounts to the splendid small Kandao Qoocam fun and allows it to be separated from the phone and operated via a USB-C extension cable.

360 videos are super fun, if you can separate the camera from the phone you will unleash the potential of this small, cheap but incredibly well-designed and well-made FUN camera. 4k videos are not much for a 360 camera, but it's the maximum you can stream live, and for many things, it's ENOUGH!
Remember this camera can be used as a webcam and connected to a PC. All ports mic and buttons are left accessible with cuts in the shell (check twice when you put the pieces together!)

All you need to know, instructions, and suggestions are here:

https://www.youtube.com/watch?v=e7SPzehmVSw

You will need to print the two parts with the feet “up”, no brim or support is necessary. Better if the layer resolution is 0.15 but perfect even at 0.2.

Part list

4x M3x12 screws (cylinder or round head) and nuts.
If you print the threaded part:
1x 3/8" to ¼" adapter to be screwed in the slot and positioned with the aid of a soldering iron
If you print the heat insert part:
1x ¼" threaded heat insert.
If you print the Gopro mount part:
Just use a short and small Gopro screw or a simple 20/25mm M5 bolt.

While I printed my definitive ones in PETG and PCTG, PLA is still a perfect choice.

Known design flaws: (version 1.0)

In order to mound and dismount the rig you need to remove the four screws.
While the rig is on you cannot use any more the cleverly designed lens protector

Please if you print it let me know what to improve and what you think about it!!

About Qoocam Fun

Here is a review of the camera from my good friend Yuquing from China.
The camera evolved with new firmware, look at his other videos too. Not only he is a clever person, but also competent and passionate.
https://www.youtube.com/watch?v=nvPY2EXUfMA

THANKYOU
to Kandao for encouragement and support in developing this idea, and especially in the person of Jasmine Lin for her kindness and personal support. Thank you, as always, to Chiara Masiero Sgrinzatto for proofing, beta testing, and always raising the level of things.