自制机枪管3D打造怪异型设计前端

Autococker Freak barrel Inception Designs Fronts

2024-01-07 11:36:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

There are two types of barrel pieces located here and they are incompatible with each other. See individual file descriptions for details, but anything labeled ID is for an Inception Designs back only. This is a work in progress, I have only printed the barrel and short can.

AC hush barrel - Freak inserts fit. I printed with supports and it was a huge pain to get them out, but doable. I ran a pencil with steel wool on a drill through the barrel to clean it up after printing which worked well. The hush cans thread on to the end of this

Hush can long - goes on the printed barrel, print this with the long endcap. I have not printed this yet to test it.

Hush can short - goes on the printed barrel, print this with the short endcap. I have printed this and it fits very well.

Hush can long single piece - I have no idea how you will print this. I played with it in the slicer and I think it needs more work. It was intended as a single piece rain cover in the long configuration.

ID noot front - goes on the front of your Inception Designs barrel back. IT IS LOUD.

ID ported front - goes on the front of your Inception Designs barrel back. I haven't tested it yet.

ID can - theoretically goes on the front of the Inception Designs back, but I have yet to print it. I honestly wouldn't print this yet as I'll be doing a lot of work on it. Go for it if you're brave.