1986年日产硬壳车型D21速度计针3D模型

1986 Nissan Hardbody (D21) Speedometer Needle

2024-01-07 14:28:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a speedometer needle that will fit an 86 D21 and probably some other similar year models. The old ones were pretty frail and often broke so I figured I'd make this. It's not perfect, there's no taper on the top, and it might be just a smigen shorter than the original and slightly more narrow but it's pretty close.

If y'all want a more refined version just lmk (if you can, idk I'm pretty new here) and I'll try to tweak it to everyone's needs.

Oh, also you might want to add supports under the cylinder thing on the sides, but you do you boo boo. Also, also it seems to have about a 50% print success rate with what I've seen. I've printed 4 and 2 ended up getting destroyed during printing. I literally changed nothing to get it to print properly. And be careful removing it from the print bed, 1 of the 2 good ones was actually destroyed when I tried removing it from the bed (granted I did just use my meat hooks) so be gentle. Luckily, it takes 10 minutes to print with "fine" settings so not the end of the world if something weird happens. Good luck!