Tapo S200B按钮立架3D模型

Tapo S200B Button Stand

2024-01-07 18:19:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

There wasn't much STL on the internet for Tapo S200B so I decided to make one myself that would fit my need of having 2 buttons. This is my first 3D model as well and I learned how to use Fusion 360 in the process.

The need for 2 buttons arose because I wanted to adjust both brightness and color hue of the lights by spinning the button which necessitated 2 buttons.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
Doesn't Matter
Supports:
No
Infill:
20
Notes:
You can print with thicker walls so that the infill doesn't show.

Print on the back flat side so that supports won't be needed.

Increase infill to make it heavier.

Post-Printing

Screwing on the metal plate

This design can be used with the double sided tape that comes with the button and then attaching the metal plate to that or screwing on the metal plate directly.

I did screw on the metal plate directly as it would be easier to remove from the holder if I wanted to remove the metal plate later on. I used flat m3 screws but you can use any flat headed screw that would fit the holes on the metal plate. The m4 screws I had will fit the hole but would have some of the head sticking out so I used a smaller size.