Tapo C200型号 Ender 3打印机 S1 Pro升级支架

Tapo C200 Ender 3 S1 Pro Mount

2024-02-05 17:37:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my first original model. I was looking for a mount for my cheap IP Tapo C200 camera to check my prints when I'm not at home. But there was non for my Ender 3 S1 Pro in thingiverse, so I learn basic Fusion 360, and did my own model!

I did like 25 iterations from scratch, using my caliper for milimetrical measuring, resolving issues of design, hardness and stability. Also I did the arm hollow to save some filament but 3mm thick to preserve stability and toughness. It was fun and learned a lot.

Don't wanna brag I know is not the best model but it is my own design, I hope it works for you as much it works for me. Let me know your feedback to improve the model or any issues.

Print Settings

Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20% or 30%
Filament brand:
Polyterra
Filament color:
Black
Filament material:
PLA
Notes:
Supports are necessary for Lego connections. It is recommended to print the c200_camera_mount.stl piece with flattest side down. Also if you can do >30% will be more stable, but 20% it's enough to save some filament.