One finger钢笔

One finger ballpoint pen

2024-01-07 19:17:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

It's my design because that one finger pen out there https://www.thingiverse.com/thing:2863653 is useless in my opinion, bulky, not fitting properly, for fat fingers. My design is for 67mm pen cartridges, because I had one spare. Anyway the concept of one finger pen is bad in general, but I wanted to try it, you need to use other two fingers anyway, otherwise your hand writing will look bad. But here it is. Print vertically with supports but not in the cartridge hole, you have to block it in slicer if you can. Anyway it was so tight fit that I've cut the cartridge part. Depending on the printer you can print it slightly bigger like 5% or so. Share , do whatever you like with it.