ESP8266蒸汽温度监测箱

ESP8266 Steam Temp Monitor Enclosure

2024-01-07 20:59:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple enclosure for an Adafruit ESP8266 Huzzah Feather mounted to a 30x70 protoboard and a 18650 LiPo battery holder. There are two slots for external sensors at one end and an opening for the USB connector. The USB opening location assumes the ESP8266 Feather has both soldered pin headers and is inserted into a socket header on the protoboard.
The top is not the most secure, but for my application it did not really matter. Just be aware of that limitation before printing and trying to use.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Supports:
No
Infill:
10% is probably OK
Filament brand:
Matter Hackers
Filament color:
Blue
Filament material:
PETG
Notes:
I printed with a brim to keep the part firmly planted to my printer bed. The picture is of a part printed in PETG, but PLA would be just fine too.