Pi摄像头支架，20mm x 20mm外壳，兼容OV5647摄像头

Pi Camera Mount for 20x20 mm Extrusions Also for OV5647 cams

2024-01-07 21:13:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Camera Holder for 3D printer Mount connects to 20x20 mm extrusions found commonly in most Creality printers and look alikes. camera can also be mounted on any other surface using just the flat bottom and an m5 bolt.

The camera angle can be adjusted horizontally and vertically.

Print Settings

Printer brand:
Creality
Printer:
Ender-5 Plus
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament brand:
Real
Filament color:
Orange
Filament material:
PETG/ PLA
Notes:
Be sure to choose the correct camera mount for your specific camera. Design is tested with OV5647 Camera and raspberry pi V1 /V2 cameras. Others may or may not fit without adjustment.

Aditional required hardware:
1. 2x m5 x16 mm Screws used for swivel mounts.
2. Rasperry pi camera or OV5647 Camera ( arducam or Chinese clone)
3. Pi camera cable