Kobra 2 LED条带控制盒

Kobra 2 led strip control box

2024-01-07 21:42:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Kobra 2 LED条带控制盒

Kobra 2 LED条带控制盒

Summary

Anycubic Kobra 2 LED control box

I designed this box to control led strip similar to this one. It is based on a DC buck converter voltage regulator. The idea is that you can turn on/off the light, and adjust the brightness with a potentiometer. The design is fairly simple and not the most elegant, so if you have ideas to enhance it, don't hesitate to suggest !

Materials

1x or 2x led strip (mine are 12v white)
1x 3.0-40V to 1.5-35V voltage regulator, i used this one
1x potentiometer (i used a 2k with a 1k resistor next to it) to replace the trimmer in the original circuit. Value of the potentiometer may change depending on the voltage of the led strip.
1x simple 3 pin mini switch

Printing time

Printing time takes an hour for the box and 10 min for the little hood on the Kobra 2 neo with speed at a 100%. It doesn't need any supports

Mounting

Two M3 screws are needed to mount the box to the aluminium profiles with nuts. Theres is 4 holes but 2 is enough

Print Settings

Printer brand:
Anycubic
Printer:
Kobra 2
Rafts:
No
Supports:
No
Infill:
20%

Tags

Anycubic DIY electronics KOBRA Kobra 2 kobra 2 neo LED light led strip

Kobra 2 LED条带控制盒

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

车身RC 1/10 全套
2023-03-26
MK47 模组道具枪
2023-03-26
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件
2023-08-23
吸血鬼之夜
2024-01-15
Neptune 4 / 4 Pro 的 Cura 切片配置与打印建议
2024-05-02

最新模型